Uji Pemulihan Cadangan Minyak dengan Injeksi Polimer Kitosan dan Surfaktan Sodium Dodecyl Sulfate Berdasarkan Uji Model Sandpack

Authors

  • Sulardi Sekolah Tinggi Teknologi Migas Balikpapan, Indonesia
  • Daffa Amelia Asmara Sekolah Tinggi Teknologi Migas Balikpapan, Indonesia
  • Nijusiho Manik Sekolah Tinggi Teknologi Migas Balikpapan, Indonesia

DOI:

https://doi.org/10.31004/irje.v5i3.2914

Keywords:

Kitosan, Sodium Dodecyl Sulfonate, Recovery Factor, Sandpack Model

Abstract

Salah satu permasalahan produksi minyak dan gas di Indonesia adalah rendahnya kemampuan lifting produksi minyak dan gas bumi. Penyebabnya adalah banyaknya sumur-sumur produksi yang idle dan sudah tidak diaktifkan lagi. Fokus penelitian adalah pemulihan cadangan minyak dan gas dengan metode injeksi bahan polimer kitosan dan surfaktan sodium dodecyl sulfate (SDS). Penelitian ini bersifat pengujian dan dilakukan dalam skala uji laboratorirum. Model injeksi larutan, pertama adalah larutan kombinasi polimer-surfaktan dengan konsentrasi kitosan 1000 mg/L, SDS sebesar 500 mg/L pada salinity formasi 10000 mg/L. Kedua adalah larutan polimer kitosan konsentrasi kitosan 1000 mg/L dengan salinity 10000 mg/L. Ketiga adalah larutan surfaktan dengan konsentrasi SDS 500 mg/L dalam salinity 10000 mg/L. Peningkatan pemulihan produksi minyak dan gas yang dapat dihasilkan dengan injeksi bahan ekstraktor kombinasi polimer surfaktan kitosan dan SDS. 12.25 %.

References

Ahmed, M. E., Sultan, A. S., Al-Sofi, A., & Al-Hashim, H. S. (2023). Optimization of surfactant-polymer flooding for enhanced oil recovery. Journal of Petroleum Exploration and Production Technology, 13(10). https://doi.org/10.1007/s13202-023-01651-0

Al-Assal, J. R., Al-Rubaye, A. H., & Al-Robai, H. A. (2023). Using sodium dodecyl sulfate (SDS) and CO₂ as environmentally friendly method for reducing residual oil saturation. IOP Conference Series: Earth and Environmental Science, 1158(3), 032011. https://doi.org/10.1088/1755-1315/1158/3/032011

Alvarado, V., & Manrique, E. (2010). Enhanced oil recovery: An update review. Energies, 3(9), 1529–1575. https://doi.org/10.3390/en3091529

Ariff, N. A. M., Omar, S., & Lim, N. A. A. (2022). The synergization of silica nanoparticle and sodium dodecyl sulfate for chemical flooding application. ASEAN Engineering Journal, 12(3), 149–153. https://doi.org/10.11113/aej.V12.17719

Bera, A., Mandal, A., & Guha, B. B. (2014). Synergistic effect of surfactant and salt mixture on interfacial tension reduction between crude oil and water in enhanced oil recovery. Journal of Chemical & Engineering Data, 59(1), 89–96. https://doi.org/10.1021/je400850c

Compass.com. (2024). Optimalkan sumur idle dan pakai teknologi terkini, pelaku industri optimistis target lifting migas 2025 bakal tercapai.

Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011). Chitosan—A versatile semi-synthetic polymer in biomedical applications. Progress in Polymer Science, 36(8), 981–1014. https://doi.org/10.1016/j.progpolymsci

Dhafa, M., Setiati, R., Malinda, M. T., & Anugrahadi, A. (2021). Compatibility test for screening surfactant flooding. IOP Conference Series: Earth and Environmental Science, 819(1), 012022. https://doi.org/10.1088/1755-1315/819/1/012022

Green, D., & Willhite, G. (2028). Enhanced oil recovery (2nd ed.). Functional Polymers.

Hao, H., et al. (2024). A study on the bio-based surfactant sodium cocoyl alaninate as a foaming agent for enhanced oil recovery in high-salt oil reservoirs. RSC Advances, 14(7), 4369–4381. https://doi.org/10.1039/d3ra07840j

Jiménez-Gómez, C. P., & Cecilia, J. A. (2020). Chitosan: A natural biopolymer with a wide and varied range of applications. Molecules, 25(17), 3981. https://doi.org/10.3390/molecules25173981

Kumar, M. N. V. R. (2000). A review of chitin and chitosan applications. Reactive & Functional Polymers, 46(1), 1–27.

Lake, L., Johns, R., Rossen, B., & Pope, G. (2024). Fundamentals of enhanced oil recovery.

Liu, Y., et al. (2024). Effect of different surfactants and nanoparticles on pore-scale oil recovery process using heterogeneous micromodel. International Journal of Energy Research, 2024, 5319748. https://doi.org/10.1155/2024/5319748

Marya Agustin, P., & Sediawan, W. B. (2017). Enhanced oil recovery (EOR) menggunakan larutan campuran sodium lignosulfonat (SLS) dan kitosan. Universitas Gadjah Mada.

Rinaudo, M. (2006). Chitin and chitosan: Properties and applications. Progress in Polymer Science, 31(7), 603–632. https://doi.org/10.1016/j.progpolymsci

Sen, R. (2008). Biotechnology in petroleum recovery: The microbial EOR. Progress in Energy and Combustion Science, 34(6), 714–724. https://doi.org/10.1016/j.pecs

Sheng, J. J. (2011). Modern chemical enhanced oil recovery: Theory and practice.

Ulfah, B. M., et al. (2023). The potential of crab chitosan polymer as EOR injection fluid. IOP Conference Series: Earth and Environmental Science, 1239(1), 012038. https://doi.org/10.1088/1755-1315/1239/1/012038.

Downloads

Published

2025-05-30

How to Cite

Sulardi, S., Asmara, D. A. ., & Manik, N. . (2025). Uji Pemulihan Cadangan Minyak dengan Injeksi Polimer Kitosan dan Surfaktan Sodium Dodecyl Sulfate Berdasarkan Uji Model Sandpack. Indonesian Research Journal on Education, 5(3), 855 –. https://doi.org/10.31004/irje.v5i3.2914

Issue

Section

Articles