Performance Evaluation of Shell and Tube Heat Exchanger With Capacity of 100,000 Btu/Day in Cilacap
DOI:
https://doi.org/10.31004/irje.v4i4.1194Keywords:
Heat Exchanger, Shell and Tube, Fouling Factor, Pressure DropAbstract
A heat exchanger (HE) is a heat exchanger that has a vital role in the oil and gas processing industry. Especially in the Fuel Oil Complex I (FOC I) unit, which is tasked with separating crude petroleum into fractions such as LPG, light naphtha, heavy naphtha, kerosene, Light Gas Oil (LGO), Heavy Gas Oil (HGO) and long residue. The continuous use of heat exchangers will cause fouling over time. The Cilacap oil and gas processing industry uses a shell and tube type heat exchanger because it has cost, fabrication, and work advantages. The evaluation results of the comparison of the fouling factor (Rd) and pressure drop values on the design data and actual data on 1 June - 30 July 2024 show that the actual fouling factor (Rd) value is greater than the design fouling factor (Rd) value. While the actual ∆P pressure drop shell side and tube side values are smaller than the design pressure drop values because the actual flow rate is much smaller than the design data flow rate. The recommendation is periodic evaluation and cleaning of accumulated dirt, mud, and scale found on the shell and tube walls to maintain heat exchanger performance.
References
Cindi Alfian, Devia Gahana dan Supriyadi, Didik., “Analisa kinerja High Pressure Heater (HPH) Tipe Shell and Tube Heat Exchanger”, Journal of Science and Applicative Technology, Volume. II, no. 2, pp. 23–33, 2018, doi: https://doi.org/10.35472/281416
Ari Fitria, Ismi. Agustina Sari, Dessy. Pangni Fahriani, Vera. Djaeni, Mohammad., “Fouling Factor Penukar Panas Shell and Tube melalui Program Heat Transfer Research Inc (HTRI),” Reka Buana : Jurnal Ilmiah Teknik Sipil dan Teknik Kimia, Volume 7, no. 2, hlm. 104–113, 2022, doi: https://doi.org/10.33366/rekabuana.v7i2.4030.
Ilmal Yaqin, Rizqi. Huda, Miftahul. Tumpu, Mula. Endri Priharanto, Yuniar. Preston Siahaan, Juniawan. Demeianto, Bobby. Hari Priyambodo, Bambang. Lazuardi Umar, Mega., “Analisa Perpindahan Panas Heat Exchanger Mesin Induk (Studi Kasus: Km. Sumber Mutiara)”, JTT (Jurnal Teknologi Terapan), Volume 8, Nomor 1, Maret 2022, doi: https://doi.org/10.31884/jtt.v8i1.355.
Septian, Bary. Aziz, Amiral. dan Rey, Paul David., “Design of Heat Exchanger Shell and Tube,” Jurnal Baut dan Manufaktur, vol. 03, no. 1, 2021, doi: https://doi.org/10. 34005/bautdanmanufaktur.v3i01.1320
Kumar Prasad, Arjun. Anand, Kaushik., “Design & Analysis of Shell & Tube Type Heat Exchanger, International Journal Of Engineering Research & Technology (IJERT) Volume 09, Issue 01 (January 2020), doi : https://doi.org/10.17577/IJERTV9IS010215.
Eka Rahayu, Ibnu. Nur Izzah, Siti. Rahadian Hidayat, Muhammad., “Analisis Kinerja Heat Exchanger Pada Preheater CDU V di Kilang RU V Balikpapan,” Jurnal Teknik Kimia Vokasional, Volume. 1, Nomor. 1, pp. 1–9, 2021, doi: https://doi.org/10.46964/ jimsi.v1i1.614
Agustina Sari, Dessy. Iksanudin, and Hakiim, Azafilmi., “A case study on maintenance of overheat - spot welding machine,” in ADRI 4th International Multidiscplinary Conference and Call for Paper 2017, Universitas Negeri Jakarta: ADRI dan Universitas Negeri Jakatya, Jan. 2017, p. 442. doi: https://doi.org/10.31227/osf.io/9h4ct.
Abbasian Arani, Ali Akbar dan Moradi, Reza., “Shell and tube heat exchanger optimization using new baffle and tube configuration,” Appl Therm Eng, vol. 157, Jul 2019, doi: https://doi.org/10.1016/j.applthermaleng.2019.113736 .
D. Q. Kern, “Proses Heat Transfer,” Mc.Graw Hill Book Company, 1950.
Christian Elby, Alby. Amalia, Rif’ah dan Ghani Safitra, Arrad., “Studi Eksperimen Pengaruh Kecepatan Aliran terhadap Performa Double Pipe Heat Exchanger,” Prosiding Seminar Nasional Teknologi Industri, Lingkungan dan Infrastruktur (SENTIKUIN) vol. 2, C5.1-C5.6. Fakultas Teknik Universitas Tribhuwana Tunggadewi, Malang, Indonesia. 24 Agustus 2019, [Daring]: https://pro.unitri.ac.id/index.php/sentikuin
Shahab, Aliyah dan Wahyuningsi, Anggi., “Evaluasi Kinerja Heat Exchanger-003 Di Pusat Pengembangan Sumber Daya Manusia Minyak Dan Gas Bumi (PPSDM Migas Cepu),” Journal of Innovation Research and Knowledge, vol. 2, no. 8, Januari 2023, doi: https://doi.org/10.53625/jirk.v2i8.4742
Dwicahyo, Reyno. Rulianah, Sri. Raharjo, Sindhuwati, Christyfani., “Evaluasi Faktor Kekotoran pada Heat Exchanger –03 Crude Distillation Unit di PPSDM Migas Cepu.”. DISTILAT: Jurnal Teknologi Separasi, vol. 8 no. 1, 2021, pp. 64-71. doi: https://doi.org/ 10.33795/distilat.v8i1.301
Asadi, Masoud. and Haghighi Khoshkhoo, Ramin., “Investigation Into Fouling Factor In Compact Heat Exchanger,” International Journal of Innovation and Applied Studies, vol. 2, no. 3, pp. 238–249, 2013
Tri Wahyudi, Agus. Leestiana, Fanny. dan Widodo, Rachmat., “Evaluasi kinerja Heat Exchanger pada Fasilitas Kilang PPSDM Migas dengan Metode Perhitungan Fouling Factor,” Majalah Ilmiah Swara Patra, vol. 12, no. 1, Apr 2022, doi: https://doi.org/10. 37525/sp/2022-1/322.
Agus Setiorini, Indah dan Faisal Faputri, Achmad., “Evaluation Of Performance Condenser Type Heat Exchanger 1110-C Shell And Tube Type Based On Fouling Factor Value in Purification Unit at Ammonia Plant PT X,” Patra Akademika, vol. 14, no. 01, 2023.
Vicky Gusniawan, Prayoga. Zaky Aldillah, Ahmad dan Rulianah, Sri., “Evaluasi Performa Heat Exchanger 11e-25 CDU I (Crude Distilation Unit I) pada Fuel Oil Complex I (FOC I) PT Pertamina (Persero) Refinery Unit IV Cilacap, Jawa Tengah,” DISTILAT: Jurnal Teknologi Separasi, vol. 10, no. 2, hlm. 463–475, Juni 2024, doi: https://doi.org/10.33795/distilat.v10i2.5065.
Jalu Prabaswara, Reftian. Rulianah, Sri. Sindhuwati, Christyfani dan Raharjo., “Evaluasi Pressure Drop Heat Exchanger-03 Pada Crude Distillation Unit PPSDM Migas Cepu,” DISTILAT : Jurnal Teknologi Separasi, vol. 2021, no. 2, hlm. 505–513, 2021, doi: https://doi.org/ 10.33795/distilat.v7i2.287
Iskandar Al Hakim, Muhammad. Bakrie, Muhammad. dan Nurlela, Rasyidi., “Pengaruh Baffle Cut Pada Shell dan Tube Heat Exchanger Terhadap Koefisien Perpindahan Panas Menyeluruh & Penurunan Tekanan,” Redoks, vol. 9, no. 2, 2024, doi: https://doi.org/10. 31851/redoks.v9i2.9089.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Griselda Ivonne Aqilah, Budi Sulistiyo Nugroho, Nimrod Alvino
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
